A MODERN GAS COFFEE-ROASTING PLANT WITH A CAPACITY OF 1,000 BAGS A DAY
Coffee roasting as a business—Wholesale coffee-roasting machinery—Separating, milling, and mixing or blending green coffee, and roasting by coal, coke, gas, and electricity—Facts about coffee roasting—Cost of roasting—Green-coffee shrinkage table—"Dry" and "wet" roasts—On roasting coffee efficiently—A typical coal roaster—Cooling and stoning—Finishing or glazing—Blending roasted coffees—Blends for restaurants—Grinding and packaging—Coffee additions and fillers—Treated coffees, and dry extracts
The coffee bean is not ready for beverage purposes until it has been properly "manufactured", that is, roasted, or "cooked". Only in this way can all the stimulating, flavoring, and aromatic principles concealed in the minute cells of the bean be extracted at one time. An infusion from green coffee has a decidedly unpleasant taste and hardly any color. Likewise, an underdone roast has a disagreeable "grassy" flavor; while an overdone roast gives a charred taste that is unpalatable to the average citizen of the United States.
Coffee Roasting as a Business
In spite of the generally admitted fact that freshly roasted coffee makes the best infusion, most of the coffee used today is not roasted at or near the place where it is brewed, but in factories that are provided with special equipment for the roasting of coffee in a wholesale way. The reasons for this are various, partly relating to the mere economy of buying and manufacturing on a large scale, and partly relating to the trained skill that is needed both for selecting suitable green coffees to make a satisfactory blend, and for the roasting work itself. The proportion of consumers (including restaurants and hotels) who roast their own coffee is so small as to be negligible, at least in the United States. The average person who buys coffee today, for brewing use, never sees green coffee at all, unless as an "educational exhibit" in some dealer's display window.
The reasons just mentioned, which have made coffee roasting a real business, all tend, of course, to make the roasting establishments of large size; but this tendency is offset by the problem of distributing the roasting coffee so that it will reach the ultimate consumer in good condition. Roasting enterprises on a comparatively small scale (not by consumers, but by sufficiently expert dealers) would probably be much more numerous on account of the "fresh-roast" argument, except for the fact that coffee-roasting machines can not be installed so easily as the grinding mills, meat-choppers, and slicing machines, that find extended use in small stores. The steam, smoke, and chaff given off by the coffee as it is roasted must be disposed of by an outdoor connection, without annoying the neighbors or creating a fire hazard.
From these general remarks, it can easily be seen that the size of individual roasting establishments will vary greatly, according to the skill of the proprietor in meeting the disadvantages of working on either the smallest or the largest scale. A wholesale plant may be considered to be one in which coffee is roasted in batches of one bag or more at a time; and with this definition, nearly all the roasting in the United States is done in a wholesale way.
A MODERN GAS COFFEE-ROASTING PLANT WITH A CAPACITY OF 1,000 BAGS A DAY
General view of the roasting room of the Jewel Tea Co., Hoboken, N.J. The equipment consists of twelve Jubilee gas machines in four groups; each group having a smoke-suction fan, and a drag conveyor over the three feed hoppers. To the left is a line of flexible-arm cooler cars.
For many years the regular factory machines have been of a size suitable for roasting two bags of coffee at a time; but roasters of larger size have recently come into considerable use.
Plants treating from fifty to a hundred and fifty bags per day are the most common; but the daily capacity runs up to a thousand bags or more. The minimum cost of equipping a plant is somewhere between five thousand dollars and ten thousand dollars. The individual machines are of standard construction; but the arrangement in a particular building, especially for the larger plants, is worked out with great care and with numerous special features, so that the goods can be handled from start to finish with minimum expense for floor space, labor, power, etc.
The practical coffee roaster locates his roasting room in the top floor of his factory building, where light and ventilation are generally best. He usually has a large skylight in the roof, directly over the roasting equipment. In addition to the advantage as regards good light and the convenient discharge of smoke, steam, and odors, through the roof, the top-story location makes it possible to send the roasted coffee by gravity through the various bins which may be needed in connection with subsequent operations, such as grinding, and for temporary storage before the final packaging and shipping.
Wholesale Coffee-Roasting Machinery
The indispensable coffee operations are roasting and cooling; and in practically all United States plants the cooling is followed by "stoning". This is an air-suction operation that effects, aided by gravity, the removal of any stones or other hard material that would damage the grinding mill. The best commercial cleaning and grading of the green coffee has usually left in every bag a few small stones. These can be got rid of better after the coffee is roasted; because it is then not only lighter, but more bulky.
Milling-Machine Connections for a Two-Roaster Plant
Besides
these three operations of roasting, cooling, and stoning, the plant may have
machinery for treating the coffee both before it is roasted and after it leaves
the stoner.
A
SIXTEEN-CYLINDER COAL ROASTING PLANT IN A NEW YORK FACTORY
This is a
view of the roasting room of B. Fischer & Co. and shows a battery of Burns coal
roasters
Treatment of the green coffee in roasting establishments is of less importance now than in years gone by; first, because most coffees now come to market more perfectly graded and cleaned than formerly; and second, because the whole-bean appearance of the coffee has become of less account, as wholesale grinding operations have increased. Nevertheless, many plants consider it highly important to have a separator for grading the coffee closely as regards the size of the beans—and particularly for the separation of round beans, or "peaberry"—as well as milling machinery for making the coffee as clean as possible before it is roasted. One green coffee operation that has lost none of its old-time importance, but on the contrary is more needed as the plants increase in size, is the mixing of different varieties of coffee—in proportions that have been decided on by sample tests—so as to get a uniform blend.
The mixer does not blend the various coffees any more surely than a good roaster cylinder will do it, but treats batches of much larger size. This means saving a great amount of labor that would be necessary for putting the desired quantity of component coffees into each individual roaster.
A proper installation of green coffee machinery requires various bins of ample capacity, and bucket elevators by which the coffee can be sent without manual labor from one operation to another. In modern plants, all the bins and elevators are constructed of metal. The separator, with its bins and elevator, may be installed independently of the rest of the plant, the graded coffee being all bagged up again and treated as new raw stock—some of it to be held for later use, or perhaps sold again unroasted. The milling machine and the mixer, however, are usually so placed and connected that the coffee can be sent from one to the other, and to the roaster feed hoppers, without any manual labor.
When the roaster sells his product in package form ready for the consumer, he will have a packaging department in which are grinding, weighing, labeling, and packing machines and equipment. In some of the more progressive plants, particularly in the United States, all the packing units are incorporated in one machine, so that the different steps in the work are carried on automatically and in one continuous operation.
Green-Coffee-Mixer Connections
To operate at full capacity, without using the story above as well as below the mixer, requires a bucket elevator and three bins, each holding a full mixing batch. The above diagram explains this setting. The mixed coffee in the discharge bin is either drawn out into bags or sent by an elevator to a milling machine or direct to the coffee roasters. A batch ready for mixing can always be accumulated in the feed bin while the previous batch is being mixed or discharged.
The fan is usually hung to the ceiling over the mixer as indicated, and connected to the suction box by a 1-in. round pipe. The fan outlet can be carried directly out-of-doors; but the dusty discharge is objectionable in most installations, and this pipe is usually carried to a dust collector from the top of which the roof outlet is connected.
The efficient roaster-executive equips his entire plant with approved labor-saving devices. In the better establishments, the coffee is carried along by mechanical conveyors through all the operations from the first cleaning machine to the final packaging.